In the unfortunate case that your Kohler Engine equipment is running slow and won't accelerate properly, you might find it to be one of these pesky culprits:
-Engine not properly warmed up
-Running out of fuel
-Spark plug gap incorrect
-Low idle set too low (check to make sure you're above 1000 RPM)
-Electric clutch dragging
-Low idle fuel setting too lean
-Crankshaft end play zeroed by drive
-Parasitic load on power take-off (PTO) shafts
If you're engine is not running at all after a hot test, and you see smoke rising out of the top of the horizontal-shaft engine or flywheel screen on the vertical-shaft engine, it could be one of the following:
-Battery cables reversed causing charging stator to short out
-Defective rectifier-regulator causing charging stator to short out
-Paint or oil burn off
-Electric clutch has no running clearance
When you're experiencing difficulties with your Kohler powered equipment, call an expert at Cub Cadet Parts n' More. We're happy to help.
.svg)
.png)
